English
French
Kentec UK Fire Suppression Releasing Panel Sigma-XT
Features
- Approved to EN12094-1, EN54-2 and EN54-4
- Three detection zones as standard
- Any single zone or any combinations of zones can be configured to release
- Configurable first stage sounder delays
- Configurable detection delays
- Zero time delay upon manual release option
- Compatible with I.S. barriers
- Non-latching zone input option to receive signals from other systems such as aspirating equipment
- Configurable extinguishant delays up to 60 seconds in 5 second steps
- Configurable extinguishant duration up to 5 minutes in 5 second steps
- Countdown timer shows time remaining until release
- Supports up to seven, four wire status indicators
- Built in Extract Fan control
- Function
- Specifications
- Description
- Additional information
- Reviews (0)
Features
- Approved to EN12094-1, EN54-2 and EN54-4
- Three detection zones as standard
- Any single zone or any combinations of zones can be configured to release
- Configurable first stage sounder delays
- Configurable detection delays
- Zero time delay upon manual release option
- Compatible with I.S. barriers
- Non-latching zone input option to receive signals from other systems such as aspirating equipment
- Configurable extinguishant delays up to 60 seconds in 5 second steps
- Configurable extinguishant duration up to 5 minutes in 5 second steps
- Countdown timer shows time remaining until release
- Supports up to seven, four wire status indicators
- Built in Extract Fan control
| TECHNICAL SPEC: | |
| Construction | 1.2mm mild sheet steel |
| IP Rating | IP30 |
| Finish | Epoxy powder coated |
| Colour - lid & box | BS 00 A 05 grey - fine texture |
| Colour - controls plate & labels | RAL 7047 light grey - satin |
| Weight | 6kg |
| Mains supply | 230V AC +10%/-15% (100 Watts maximum) |
| Mains supply fuse | 1.6 Amp (F1.6A L250V) |
| Power supply rating | 3 Amps total including battery charge 28V +/- 2V |
| Maximum ripple current | 200 millivolts |
| Battery type (Yuasa NP) | Two 12 Volt 7Ah sealed lead acid in series |
| Battery charge voltage | 27.6VDC nominal (temperature compensated) |
| Battery charge current | 0.7A maximum |
| Battery fuse | 20mm, 3.15A glass |
| Maximum current draw from batteries | 3 Amps |
| Quiescent current of panel in mains fail | 0.095A |
| R0V output | Fused at 500mA with electronic fuse |
| Sounder outputs | 24V Fused at 500mA with electronic fuse |
| Fault relay contact rating | 30VDC 1A Amp maximum |
| Fire relay contact rating | 30VDC 1A Amp maximum |
| Local fire relay contact rating | 30VDC 1A Amp maximum |
| First stage contact rating | 30VDC 1A Amp maximum |
| Second stage contact rating | 30VDC 1A Amp maximum |
| Extract contact rating | 30VDC 1A Amp maximum |
| Zone quiescent current | 2mA maximum |
| Terminal capacity | 0.5mm² to 2.5mm² solid or stranded wire |
| Number of detectors per zone | Dependent on type (maximum 32) |
| Number of sounders per circuit | Dependent on type (max. 0.5A per sounder circuit) |
| Detection circuit end of line | 6K8 5% ½ Watt resistor |
| Sounder circuit end of line | 10K 5% ¼ Watt resistor |
| Extinguishant output EOL | 1N4004 Diode |
| No. of detection circuits | 3 |
| No. of sounder circuits | 2 x 1st Stage, 1 x 2nd Stage |
| Extinguishant release output | Fused at 1 Amp |
| Extinguishant release delay | Adjustable 0 to 60 seconds (in 5 second steps) |
| Extinguishant release duration | Adjustable 60 to 300 seconds (in 5 second steps) |
| SIL, AL, FLT, RST inputs | Switched -ve, max resistance 100 Ohms |
| Zone normal threshold | 8K ohms to 1K ohm |
| Detector alarm threshold | 999 ohms to 400 ohms |
| Call point alarm threshold | 399 ohms to 100 ohms |
| Short circuit threshold | 99 ohms to 0 ohms |
| Head removal condition | 15.5 to 17.5 volts |
| Monitored inputs normal threshold | FP200 or equivalent |
| Monitored inputs alarm threshold | 8K ohms to 1K ohm |
| Monitored inputs Short circuit threshold | 999 ohms to 100 ohms |
| Status unit/Ancillary board connection | 99 ohms to 0 ohms |
| Status unit power output | Two wire RS485 connection |
| Cabling | Fused at 500mA with electronic fuse |
Description
Overview
Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals, the Sigma XT extinguishant releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations.
With three detection zones as standard, extinguishant release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.
The extensive configuration options of the Sigma XT allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment (EN12094-1).
The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety.
The countdown timer is duplicated on up to seven remote status units to provide local indication of the extinguishant system status.
With all of the electronics mounted on a single, easily removable, steel plate Sigma XT panels are both robust and easy to install.
Sigma XT is supplied in an enclosure that matches the design and colour of the Sigma CP range.
Additional information
| Weight | 23 kg |
|---|---|
| Dimensions | 12 × 24 × 35 in |
| Color | Black, Green, Indigo |
| Size | Large, Medium, Small |
Be the first to review “Kentec UK Fire Suppression Releasing Panel Sigma-XT”
Related Products
-
TD-3332H4
Features
Support 16 / 32 CH 8MP / 5MP / 4MP / 3MP / 1080P / 960P / 720P IP input
Adopt standard H.265 / H.264 high profile compression format to get high-quality video at much lower bit rate
Intuitive and user-friendly Graphic User Interface ( GUI ), Windows style operation by mouse
Multi-mode recording: manual / timer / motion / sensor
Playback : 16 CH simultaneous playback
Search : time slice, time, event ( manual, sensor, motion ), tag search
Express and flexible backup via USB, network and so on
Pentaplex : preview, record, playback, backup and remote access
DHCP, DDNS, PPPoE network protocol and CMS supported
Remote control via IE or CMS : preview, playback, backup, PTZ and configuration
Dual stream technology for local storage with high definition, remote network transmission and remote surveillance with mobile device
Multi-user online simultaneously
Authorization management, log view and device status view
4K output, true high resolution display
Support PTZ preset and auto cruise, up to 255 presets and 8 cruises
Support NAT function and QRCode scanning by mobile phone and PAD
Powerful smart phone & Pad surveillance with iOS and Andriod OS
-
You've just added this product to the cart:
Standard 2-8 Zone Conventional Fire Alarm Panel-C-tech
Standard 2-8 Zone Conventional Fire Alarm Panel-C-tech
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13. compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Two detector zone circuits.
- Four conventional sounder circuits*
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors.
-
You've just added this product to the cart:
Kidde Engineered Fire Suppression System 3M NOVEC 1230
Kidde Engineered Fire Suppression System 3M NOVEC 1230
Key Features:
- Novec 1230 fluid has a zero Ozone Depletion Potential
- Novec 1230 fluid discharges as a colourless, electrically non-conductive,and non-corrosive gas
- Novec 1230 fluid poses no safety risk to people
- It is effective on a wide range of Class A, B and electrical fires.
- Novec 1230 fluid puts fires out quickly
- Applications: Computer Suites, Control Rooms, Data Processing-Equipment, Financial Centers and Banks, Heritage Sites, Medical and Laboratory Equipment, Petrochemical Plants, Telecom Centers etc
-
TS2100
Tripod turnstiles are compact and cost-effective entrance solutions. Designing for smooth and silent operation, reducing power consumption, wear and tear. It is suitable for areas with a high traffic.
The TS2100 series offer a slim, two-legged casework made of stainless steel, ideal for sites where a high traffic and space are issued
By receiving a signal from the access control system, or pushing button, it allows the entry of one person in a time. The status is shown on the led-way mode indicators on the top. Entering into different directions are electronically controlled. Default mode is to lock the mechanism until a valid authorization signal is received. If you want to set one side free, you can have it by adjusting the mechanism. In case of emergency, the horizontal arm will drop to allow free passage. Led way mode indicators are included as standard.
-
You've just added this product to the cart:
AAAF FOAM/WATER FIRE EXTINGUISHER
AAAF FOAM/WATER FIRE EXTINGUISHER
• British Standards Institution – BSI approval.
• Foam type is suitable for Class A & B.
• Water type is suitable for Class A.
• Protective plastic lining.
• Colour coded for instant recognition.
• High quality and good value.
• ISO 9001:2000 Certified
Reviews
There are no reviews yet.