
DS-7732NI-E4
Embedded Plug & Play NVR
• Third-party network cameras supported
• Up to 6 Megapixels resolution recording
• HDMI and VGA output at up to 1920×1080P
resolution
• 8/16/32-ch network cameras can be connected with
80M/160M/160M incoming bandwidth
• Up to 4 SATA interfaces
• Support network detection, including network delay,
packet loss, etc
- Function
- Specifications
- Description
- Additional information
- Reviews (0)
Embedded Plug & Play NVR
• Third-party network cameras supported
• Up to 6 Megapixels resolution recording
• HDMI and VGA output at up to 1920×1080P
resolution
• 8/16/32-ch network cameras can be connected with
80M/160M/160M incoming bandwidth
• Up to 4 SATA interfaces
• Support network detection, including network delay,
packet loss, etc
Video/Audio Input
IP video input: | | | 32-ch |
Two-way audio input: | | | 1-ch, RCA (2.0 Vp-p, 1kΩ) |
Network | ||
---|---|---|
Incoming bandwidth: | | | 160Mbps |
Outgoing bandwidth: | | | 80Mbps |
Remote connection: | | | 128 |
Video/Audio Output | ||
HDMI/VGA output: | | | 1-ch, resolution: 1920 × 1080P /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz |
Recording Resolution: | | | 6MP/5MP/4MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
Frame Rate: | | | Main stream: 50 fps (P) / 60 fps (N) Sub-stream: 50 fps (P) / 60 fps (N) |
Decoding | ||
Live view / Playback: | | | 6MP/5MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
Capability: | | | 16-ch@4CIF, 12-ch@720P, 6-ch@1080P |
Hard Disk | ||
SATA: | | | 4 SATA interfaces for 2 HDDs + 1 DVD-R/W (default), or 4HDDs |
Capacity: | | | Up to 6TB capacity for each HDD |
External Interface | ||
Network Interface: | | | 2 RJ-45 10/100/1000Mbps self-adaptive Ethernet interfaces |
USB Interface: | | | Front panel: 2 × USB 2.0 Rear panel: 1 × USB 3.0 |
Alarm In: | | | 16-ch |
Alarm Out: | | | 4-ch |
General | ||
Power Supply: | | | 100~240VAC |
Consumption(without hard disk and POE): | | | ≤ 20W |
Working Temperature: | | | -10 ºC ~ +55 ºC (+14 ºF~ + 131 ºF) |
Working Humidity: | | | 10 % ~ 90 % |
Chassis: | | | 19-inch rack-mounted 1.5U chassis |
Dimensions: | | | 445 × 390 × 70mm (17.5 ×15.3 × 2.8 inch) |
Weight(without HDD): | | | ≤ 4 Kg (8.82 lb) |
Description
Embedded Plug & Play NVR
• Third-party network cameras supported
• Up to 6 Megapixels resolution recording
• HDMI and VGA output at up to 1920×1080P
resolution
• 8/16/32-ch network cameras can be connected with
80M/160M/160M incoming bandwidth
• Up to 4 SATA interfaces
• Support network detection, including network delay,
packet loss, etc
Additional information
Weight | 23 kg |
---|---|
Dimensions | 12 × 24 × 35 in |
Color | Black, Green, Indigo |
Size | Large, Medium, Small |
Be the first to review “DS-7732NI-E4” Cancel reply
Related Products
-
0 out of 5
TS2100
Tripod turnstiles are compact and cost-effective entrance solutions. Designing for smooth and silent operation, reducing power consumption, wear and tear. It is suitable for areas with a high traffic.
The TS2100 series offer a slim, two-legged casework made of stainless steel, ideal for sites where a high traffic and space are issued
By receiving a signal from the access control system, or pushing button, it allows the entry of one person in a time. The status is shown on the led-way mode indicators on the top. Entering into different directions are electronically controlled. Default mode is to lock the mechanism until a valid authorization signal is received. If you want to set one side free, you can have it by adjusting the mechanism. In case of emergency, the horizontal arm will drop to allow free passage. Led way mode indicators are included as standard.
-
0 out of 5
Standard 2-8 Zone Conventional Fire Alarm Panel-C-tech
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13. compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Two detector zone circuits.
- Four conventional sounder circuits*
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors.
-
0 out of 5
6 ZONE WALK THROUGH GATE UOUOU MODEL: CP200
- Cp-200 is basically having 6 Zones
- Each six zone is divided from head to toe to detect high to low level
- 0-99 sensitivity levels are all working to 0.2mm substance too
- 24 led pair lights for indication of metal in suspected
- low-high two types of alarms
- Working power: 30 W, Working power: (100 v-240 v)+-10%
Standard: GB15210-2003
-
0 out of 5
Conventional heat detectors TS/TR
Main characteristics
Static / Elevation of T°
Lockable
Standard EN54-5
1 remote alarm indicator output
Cable section max 2,5mm² -
0 out of 5
TD-7420AS
Features
1080P real time image, high resolution, true color
4 kinds of standard and lossless high-definition video outputs
Up to 1000 TVL resolution
CMOS progressive scan, perfectly capture the moving object
Support OSD menu
High speed, long distance, real time transmission
Auto color to B/W at low illumination
Support ICR switch, true day/night
Support noise reduction function
10-20m IR night view distance
IP66 ingress protection
Support COC
Support 960H CVBS output
Reviews
There are no reviews yet.